Polski
All Categories
-
Motorcycle
addremove
-
Body
addremove
-
Braking system
addremove
-
Steering system
addremove
-
Drive system
addremove
-
Exhaust system
-
Used parts
-
Motogadget
addremove
-
Clothes
addremove
-
Engine parts
-
3D prints
Parts
Subcategories
There are 2954 products.
Availability: 6 In Stock
The digital harness C-BS ("BS" stands for switches and buttons) for the bike control via push buttons and switches is an universal harness, what contain 2 small control boxes. The control boxes "talk" together via a thin serial bus cable. The switches, push buttons and power cables are wired direct to the nearest box. This reduces the amount of cables and the installation time significant in a typ
Availability: 10 In Stock
You can use the module with a permanent switch if you wire the yellow cable to ground. The module works with a push button if the yellow cable is not connected. By the way, you can switch off the headlight in the button mode when you press the button for more than 2 seconds. A further press on the button switch on the headlight again.
Availability: 2 In Stock
Dimensions: 38 mm x 16 mm x 11 mm
Availability: 10 In Stock
You can use the module also as a standard headlight relay. Just wire the 2 thin input cables together to one push button. The first press on the push button will switch on output 1 (low beam). Every further press on the button toggle the 2 outputs.
Availability: 10 In Stock
If an indicator fails in subsequent operation, i.e. the current consumed falls below 20% of the normal operating current, the Flasher Checker activates the hazard warning function for as long as the flasher relay is activated. The hazard warning function switches off automatically when the flasher relay is deactivated.
Availability: 1 In Stock
Just connect the red cable to plus 12 Volt ignition, the black cable to ground / chassis, the thin input cables to the two outputs of the flasher relay in your bike and the thick output cables to your indicators. That's it.
