B-Box
    B-Box

B-Box

180 €
- Switch - output for parking light / Plate light / speedo etc.
Quantity
In stock

 

Safe shopping

  Types of deliveries and payments:

[see details]

  Complaints and returns:

[see details]

available payment methods

Guarantee safe & secure checkout

Delivery time shipment

Electronicbox Version B

The B-Box is our response from some clients, who prefer an easy mechanical implementation of the control box in a bike and who don't take care about a bit bigger size compare to our other devices. The B-Box can be controlled with the standard ignition switch. 8 implemented status led's allow a fast check while the installation or the adjustment of the different functions. A 15 Ampere inline fuse in the main line is integrated. However, the outputs are short circuit protected and self resetting. You can control the following functions with the box:

  • Switch - output for parking light / Plate light / speedo etc.
  • Ignition (with or without side stand switch control)
  • Starter (with or without neutral switch control)
  • Headlight with button or switch control
  • Integrated flasher relay, control with buttons or switches
  • Brake light with flasher option
  • 2 buttons option, you can control your bike with only 2 buttons in the handlebar.
  • Horn
DP9801
8 Items

Data sheet

Manufacturer
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Body material
ABS plastic
ABS plastic
waterresist potted
waterresist potted
Input voltage range
7 - 18 Volt
Producent
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Inline fuse
15 Ampere

16 other products in the same category:

Evo Flasher 3
Quick view

Evo Flasher 3

69 €
Availability: 9 In Stock
An auto-cancel function is integrated into the module. The corresponding output flashes 4 times when a turn signal button is pressed briefly for less than 0.5 seconds and then switches off. This function can be used for overtaking. If the button is pressed for longer than 0.5 seconds, the output flashes 40 times. The auto-cancel function can be deactivated by connecting the green wire to ground.
TSM4U
Quick view

TSM4U

98 €
Availability: 3 In Stock
A short press of a turn signal button (less than 0.5 seconds) for overtaking causes the corresponding turn signal to flash 4 times. A longer press (more than 0.5 seconds) causes the corresponding turn signal to flash 40 times. This auto-cancel function can be disabled by switching on the dip switch on the pcb.
Flasher Booster
Quick view

Flasher Booster

39 €
Availability: 20 In Stock
The Flasherbooster is connected between original flasher relay and your aftermarket indicators. It increase the supply voltages from the original flasher relay to 12 Volt and allow you to use your choice of aftermarket flashers at your bike. An integrated loadequalizer with 0,8 Watt load takes care for the correct flasher frequency in the most bikes.
Micro Speedo Module
Quick view

Micro Speedo Module

52 €
Availability: 10 In Stock
The speedometer is very easy to use: If the button is pressed and held down when the power supply is switched on, the wheel circumference appears on the display in cm and counts up between 50 cm and 220 cm until the button is released. The 4 LEDs on the outside indicate neutral, high beam, indicators and oil pressure.
Rear Light EU (Indian)
Quick view

Rear Light EU (Indian)

108 €
Availability: 10 In Stock
The Rear Light EU is a module for Indian bikes with emergency flasher function. It converts the two signals from the original flasher / brake light combination in four separate outputs for brake light / rear light and indicators. A brakelight dim function is activated by default.
Rear Light EU
Quick view

Rear Light EU

108 €
Availability: 10 In Stock
The Rear Light EU is a module for bikes with emergency flasher function. It converts the two signals from the original flasher / brake light combination in four separate outputs for brake light / rear light and indicators. A conversion of an US bike according to the requirements in the EU is much easier and less cost intensive with this new module.
Vari Load
Quick view

Vari Load

82 €
Availability: 7 In Stock
The solution is a digital adjustable load-equalizer with 50 different presets. The Vari Load is connected to your flashers. The load is adjustable via a simple "programming" cable.
Marker Light X
Quick view

Marker Light X

43 €
Availability: 10 In Stock
You can also remove the marker light function of the BCM module if you wire the Marker Light X between BCM module and the indicators. This eliminate the marker light function of the indicators.