Polski
Availability: 100 In Stock
Przełącznik ze stali nierdzewnej z gwintem 8 mm. Mały rozmiar pozwala na prawie niewidoczny montaż w kierownicy w połączeniu z modułem sterującym.
All Categories
-
Motorcycle
addremove
-
Body
addremove
-
Braking system
addremove
-
Steering system
addremove
-
Drive system
addremove
-
Exhaust system
-
Used parts
-
Motogadget
addremove
-
Clothes
addremove
-
Engine parts
-
3D prints
GND Split
5 €
Dimensions: 22 mm x 22 mm x 16 mm
Safe shopping
Types of deliveries and payments:
[see details]
Complaints and returns:
[see details]
Guarantee safe & secure checkout
GND Split
Many electrical problems at the bike result from a bad connection to the minus pole of the battery. The chassis is often in use as minus pole, what is not the best connection due to rust, paint or dirt at the contact screw. The Gnd-Split is a 4 pin divider what can be screwed direct at the minus pole of the battery. It can split up to 4 cables with a maximum size of AWG14.
Dimensions: 22 mm x 22 mm x 16 mm
DP9842
78 Items
Data sheet
- Manufacturer
- 27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28 - Dimensions
- 22 mm x 22 mm x 16 mm
22 mm x 22 mm x 16 mm - Producent
- 27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28 - Number of outputs
- 4
- Maximum cable size
- AWG14
16 other products in the same category:
Availability: 6 In Stock
The digital harness C-BS ("BS" stands for switches and buttons) for the bike control via push buttons and switches is an universal harness, what contain 2 small control boxes. The control boxes "talk" together via a thin serial bus cable. The switches, push buttons and power cables are wired direct to the nearest box. This reduces the amount of cables and the installation time significant in a typ
Availability: 5 In Stock
An auto-cancel function is integrated into the module. The corresponding output flashes 4 times when a turn signal button is pressed briefly for less than 0.5 seconds and then switches off. This function can be used for overtaking. If the button is pressed for longer than 0.5 seconds, the output flashes 40 times. The auto-cancel function can be deactivated by connecting the green wire to ground.
Availability: Out of stock
Availability: 9 In Stock
Ulepszone kopie oryginalnych płytek przycisków kierownicy Big Dog. Powierzchnia styków pokryta chemicznym złotem, sprężyste kopułki metalowe.
Availability: 1 In Stock
Front Sets - Driver’s Footrest - MODEL 1B (Long, Black) BMW K100 K75 K1100 Cafe Racer Scrambler
405 €
Availability: 6 In Stock
Availability: 10 In Stock
As soon as an on-board voltage of 15.1 volts is exceeded for longer than 2 seconds, a warning flasher function is activated via the two blinker outputs and the additional LED output is switched on. In most cases, it is then sufficient to switch off the engine immediately to prevent major damage.
Availability: Out of stock
Availability: 10 In Stock
Care must be taken to ensure the correct position and alignment of the magnet during installation. The integrated LED helps to ensure correct alignment.
Availability: 1 In Stock
Availability: 13 In Stock
Availability: 10 In Stock
An auto-cancel function is integrated into the module. The corresponding output flashes 4 times when a turn signal button is pressed briefly for less than 0.5 seconds and then switches off. This function can be used for overtaking. If the button is pressed for longer than 0.5 seconds, the output flashes 40 times. The auto-cancel function can be deactivated by connecting the green wire to ground.
Availability: 11 In Stock