Evo Flasher 2

69 €
An auto-cancel function is integrated into the module. The corresponding output flashes 4 times when a turn signal button is pressed briefly for less than 0.5 seconds and then switches off. This function can be used for overtaking. If the button is pressed for longer than 0.5 seconds, the output flashes 40 times. The auto-cancel function can be deactivated by connecting the green wire to ground.
Quantity
In stock

 

Safe shopping

  Types of deliveries and payments:

[see details]

  Complaints and returns:

[see details]

available payment methods

Guarantee safe & secure checkout

Delivery time shipment

Evo Flasher 2

This module replaces the old Harley turn signal module 68537-89G and, thanks to modern electronics, is significantly smaller and more robust than its predecessor.

An auto-cancel function is integrated into the module. The corresponding output flashes 4 times when a turn signal button is pressed briefly for less than 0.5 seconds and then switches off. This function can be used for overtaking. If the button is pressed for longer than 0.5 seconds, the output flashes 40 times. The auto-cancel function can be deactivated by connecting the green wire to ground.

A hazard warning light function is also integrated. This is activated by simultaneously pressing the left and right turn signals and deactivated by pressing either button.

The flashing speed is independent of the connected load, so LED turn signals or halogen bulbs can be used.

DP9855
5 Items

Data sheet

Manufacturer
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Input voltage range
7 - 18 Volt
Producent
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Replaces
Harley TSM module 68537-89G
Harley TSM module 68537-89G
Auto-cancel short press
4 flashes
Auto-cancel long press
40 flashes

16 other products in the same category:

Exhaust Muffler 4in1 Collector +db Killer BMW K100 K1100 Cafe Racer Tail Pipes
  • Reduced price
  • Pack
Availability: 16 In Stock

All you need to know:

  • Compatibility - fits BMW K100 (1982-1991), BMW K100 RS (1989-1992), and BMW K1100 (1992-2002).
  • Kit includes - exhaust muffler, db killer, 4in1 collector, and spring.
  • Material - made from high-quality stainless steel for corrosion resistance and durability.
  • Dimensions - exhaust length 43 cm; 4in1 outlet diameter 50.8 mm; 4in1 connector length 185 mm.
  • Adjustable Db-Killer - allows noise modification by drilling additional holes.
  • Easy installation - designed for straightforward mounting with options to fit with rearsets.
  • Design - CNC-manufactured in the EU with a unique, durable, and lightweight pattern.

Easy Keyless RFID

201 €
Availability: 10 In Stock
The activation of the module is made via a press on a button. Now you have 15 seconds time to put your rfid tag in front of the antenna. A red led on the antenna indicate the waiting state of the module. If the rfid tag is recognized then the led changes to blue color and the power for the bike is switching on. If the rfid tag is not recognized then the module fall back in sleep mode.

Multi Flash C

43 €
Availability: 1 In Stock
Just connect the red cable to plus 12 Volt ignition, the black cable to ground / chassis, the thin input cables to the two outputs of the flasher relay in your bike and the thick output cables to your indicators. That's it.

Rear Light EU-CS Converter

165 €
Availability: 11 In Stock
The Rear Light EU-C is a blinker splitter what converts the two signals from the original flasher / brake light combination and the center brake light in four separate outputs for brake light / rear light and indicators. 7 integrated led's allow a quick test while the installation. The 4 power outputs are short circuit protected.

Speedsensor

23 €
Availability: 10 In Stock
Care must be taken to ensure the correct position and alignment of the magnet during installation. The integrated LED helps to ensure correct alignment.

Evo Flasher 3

69 €
Availability: 9 In Stock
An auto-cancel function is integrated into the module. The corresponding output flashes 4 times when a turn signal button is pressed briefly for less than 0.5 seconds and then switches off. This function can be used for overtaking. If the button is pressed for longer than 0.5 seconds, the output flashes 40 times. The auto-cancel function can be deactivated by connecting the green wire to ground.