Evo Flasher 3
    Evo Flasher 3

Evo Flasher 3

69 €
An auto-cancel function is integrated into the module. The corresponding output flashes 4 times when a turn signal button is pressed briefly for less than 0.5 seconds and then switches off. This function can be used for overtaking. If the button is pressed for longer than 0.5 seconds, the output flashes 40 times. The auto-cancel function can be deactivated by connecting the green wire to ground.
Quantity
In stock

 

Safe shopping

  Types of deliveries and payments:

[see details]

  Complaints and returns:

[see details]

available payment methods

Guarantee safe & secure checkout

Delivery time shipment

Evo Flasher 3

This module replaces the old Harley turn signal module 68540-96 and, thanks to modern electronics, is significantly smaller and more robust than its predecessor.

An auto-cancel function is integrated into the module. The corresponding output flashes 4 times when a turn signal button is pressed briefly for less than 0.5 seconds and then switches off. This function can be used for overtaking. If the button is pressed for longer than 0.5 seconds, the output flashes 40 times. The auto-cancel function can be deactivated by connecting the green wire to ground.

A hazard warning light function is also integrated. This is activated by simultaneously pressing the left and right turn signals and deactivated by pressing either button.

The flashing speed is independent of the connected load, so LED turn signals or halogen bulbs can be used.

DP9856
9 Items

Data sheet

Manufacturer
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Input voltage range
7 - 18 Volt
Producent
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Replaces
Harley TSM module 68540-96
Harley TSM module 68540-96
Auto-cancel short press
4 flashes
Auto-cancel long press
40 flashes

16 other products in the same category:

E-Harness
Quick view

E-Harness

460 €
Availability: 3 In Stock
The E-Harness contain a dashboard control module and 2 power modules what control the 12 Volt power to all lights and other 12 Volt devices in a car. All switches and buttons at the dashboard are connected to the dashboard module. The modules "talk" via a small 2-wire data line. Almost all power outputs are short circuit protected and self resetting after the short circuit.
Brake 2 Flash
Quick view

Brake 2 Flash

37 €
Availability: 4 In Stock
The programming of a flasher mode is easy and will cost you about 30 seconds without the need to be a software specialist.
Holder
Quick view

Holder

8 €
Availability: 18 In Stock
The small dimensions and the low weight of the electronic box devices allow in the most cases to fix the box with Velcro tape somewhere in the bike. However, for some rough situations we recommend to fix the box with this holder at the bike. The holder have 4 mm holes and a double sided sticky tape on the upper contact surface faced to the box, what prevent the box from unwanted moves if heavy vib
Evo Flasher 2
Quick view

Evo Flasher 2

69 €
Availability: 5 In Stock
An auto-cancel function is integrated into the module. The corresponding output flashes 4 times when a turn signal button is pressed briefly for less than 0.5 seconds and then switches off. This function can be used for overtaking. If the button is pressed for longer than 0.5 seconds, the output flashes 40 times. The auto-cancel function can be deactivated by connecting the green wire to ground.
Touch 2 Switch
Quick view

Touch 2 Switch

44 €
Availability: 10 In Stock
You can use the module also as a standard headlight relay. Just wire the 2 thin input cables together to one push button. The first press on the push button will switch on output 1 (low beam). Every further press on the button toggle the 2 outputs.