Flasher Booster
    Flasher Booster

Flasher Booster

39 €
The Flasherbooster is connected between original flasher relay and your aftermarket indicators. It increase the supply voltages from the original flasher relay to 12 Volt and allow you to use your choice of aftermarket flashers at your bike. An integrated loadequalizer with 0,8 Watt load takes care for the correct flasher frequency in the most bikes.
Quantity
In stock

 

Safe shopping

  Types of deliveries and payments:

[see details]

  Complaints and returns:

[see details]

available payment methods

Guarantee safe & secure checkout

Delivery time shipment

Flasherbooster

Some new bikes have original led flashers what work with voltages between 6 - 9 Volt. This saves a bit money for the manufacturer, cause he have only one voltage converter in his flasher relay instead of 4 voltage converters in the indicators. However, this makes it a bit complicated to change the original indicators against nice aftermarket indicators.

The Flasherbooster is connected between original flasher relay and your aftermarket indicators. It increase the supply voltages from the original flasher relay to 12 Volt and allow you to use your choice of aftermarket flashers at your bike. An integrated loadequalizer with 0,8 Watt load takes care for the correct flasher frequency in the most bikes.

DP9813
20 Items

Data sheet

Manufacturer
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Dimensions
38 mm x 16 mm x 11 mm
38 mm x 16 mm x 11 mm
Body material
ABS with 2k epoxy resin potted
Input voltage range
6 - 18 Volt
Producent
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Maximum output power
40 Watt / output

16 other products in the same category:

Brake 2 Flash
Quick view

Brake 2 Flash

37 €
Availability: 4 In Stock
The programming of a flasher mode is easy and will cost you about 30 seconds without the need to be a software specialist.
Speedsensor
Quick view

Speedsensor

23 €
Availability: 10 In Stock
Care must be taken to ensure the correct position and alignment of the magnet during installation. The integrated LED helps to ensure correct alignment.
Przełącznik 8 mm
Quick view

Przełącznik 8 mm

8 €
Availability: 100 In Stock
Przełącznik ze stali nierdzewnej z gwintem 8 mm. Mały rozmiar pozwala na prawie niewidoczny montaż w kierownicy w połączeniu z modułem sterującym.
C-BS Harness
Quick view

C-BS Harness

299 €
Availability: 6 In Stock
The digital harness C-BS ("BS" stands for switches and buttons) for the bike control via push buttons and switches is an universal harness, what contain 2 small control boxes. The control boxes "talk" together via a thin serial bus cable. The switches, push buttons and power cables are wired direct to the nearest box. This reduces the amount of cables and the installation time significant in a typ