Multi Flasher Relay

43 €
Dimensions: 38 mm x 16 mm x 11 mm
Quantity
In stock

 

Safe shopping

  Types of deliveries and payments:

[see details]

  Complaints and returns:

[see details]

available payment methods

Guarantee safe & secure checkout

Delivery time shipment

Multi Flasher Relay

This is a small flasher controller for pushbuttons in a small package what will fit in every handlebar. A comfort flasher function is integrated what will switch off the indicators after a while if no button is be pushed.

DP9807
10 Items

Data sheet

Manufacturer
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Dimensions
38 mm x 16 mm x 11 mm
38 mm x 16 mm x 11 mm
Body material
ABS with 2k epoxy resin potted
Input voltage range
6 - 18 Volt
Maximum temperature
80°C
80°C
Producent
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Maximum output power
40 Watt / output

16 other products in the same category:

Touch 2 Switch

44 €
Availability: 10 In Stock
You can use the module also as a standard headlight relay. Just wire the 2 thin input cables together to one push button. The first press on the push button will switch on output 1 (low beam). Every further press on the button toggle the 2 outputs.

Rear Light EU

108 €
Availability: 10 In Stock
The Rear Light EU is a module for bikes with emergency flasher function. It converts the two signals from the original flasher / brake light combination in four separate outputs for brake light / rear light and indicators. A conversion of an US bike according to the requirements in the EU is much easier and less cost intensive with this new module.

Holder

8 €
Availability: 18 In Stock
The small dimensions and the low weight of the electronic box devices allow in the most cases to fix the box with Velcro tape somewhere in the bike. However, for some rough situations we recommend to fix the box with this holder at the bike. The holder have 4 mm holes and a double sided sticky tape on the upper contact surface faced to the box, what prevent the box from unwanted moves if heavy vib

Evo Flasher 3

69 €
Availability: 9 In Stock
An auto-cancel function is integrated into the module. The corresponding output flashes 4 times when a turn signal button is pressed briefly for less than 0.5 seconds and then switches off. This function can be used for overtaking. If the button is pressed for longer than 0.5 seconds, the output flashes 40 times. The auto-cancel function can be deactivated by connecting the green wire to ground.

Minimal Indicator

41 €
Availability: 14 In Stock
The minimal indicator is a small microcontroller module and a 3 color led. The controller drives the different colors of the led and allows to indicate all necessary functions of your bike with just one led. Even 2 or 3 events at the same time can be indicated easily. The small dimensions of the module allows the implementation in the head light or even in the handle bar. You can indicate the foll

Easy Keyless RFID

201 €
Availability: 10 In Stock
The activation of the module is made via a press on a button. Now you have 15 seconds time to put your rfid tag in front of the antenna. A red led on the antenna indicate the waiting state of the module. If the rfid tag is recognized then the led changes to blue color and the power for the bike is switching on. If the rfid tag is not recognized then the module fall back in sleep mode.

C-BS Harness

299 €
Availability: 6 In Stock
The digital harness C-BS ("BS" stands for switches and buttons) for the bike control via push buttons and switches is an universal harness, what contain 2 small control boxes. The control boxes "talk" together via a thin serial bus cable. The switches, push buttons and power cables are wired direct to the nearest box. This reduces the amount of cables and the installation time significant in a typ