Pol Changer
    Pol Changer

Pol Changer

43 €
Dimensions: 38 mm x 16 mm x 11 mm
Quantity
In stock

 

Safe shopping

  Types of deliveries and payments:

[see details]

  Complaints and returns:

[see details]

available payment methods

Guarantee safe & secure checkout

Delivery time shipment

Pol Changer

Some bikes switch the outputs for the direction indicators to minus, when active. This make a change of the original indicators against aftermarket indicators a bit tricky. This polarity changer is the solution for it. It convert the ground switched signal from the bcm module or flasher relay to a positive supply voltage for the indicators. The module contains 2 separate channels. The maximum load is 60 Watt per side.

Maximum ambience temperature: 80 degree Celsius

DP9836
20 Items

Data sheet

Manufacturer
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Dimensions
38 mm x 16 mm x 11 mm
38 mm x 16 mm x 11 mm
Body material
ABS with 2k epoxy resin potted
Input voltage range
6 - 18 Volt
Maximum temperature
80°C
80°C
Producent
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Maximum output power
60 Watt / output

16 other products in the same category:

Flasher Booster
Quick view

Flasher Booster

39 €
Availability: 20 In Stock
The Flasherbooster is connected between original flasher relay and your aftermarket indicators. It increase the supply voltages from the original flasher relay to 12 Volt and allow you to use your choice of aftermarket flashers at your bike. An integrated loadequalizer with 0,8 Watt load takes care for the correct flasher frequency in the most bikes.
Przycisk 8 mm
Quick view

Przycisk 8 mm

7 €
Availability: 236 In Stock
Przycisk chwilowy ze stali nierdzewnej z gwintem 8 mm. Bardzo mały, pasuje bezpośrednio do większości kierownic. Obsługa w rękawicach.
H-Box
Quick view

H-Box

128 €
Availability: 10 In Stock
- Light control with switch and push button possible
Overvoltage Indicator
Quick view

Overvoltage Indicator

43 €
Availability: 10 In Stock
As soon as an on-board voltage of 15.1 volts is exceeded for longer than 2 seconds, a warning flasher function is activated via the two blinker outputs and the additional LED output is switched on. In most cases, it is then sufficient to switch off the engine immediately to prevent major damage.