Harness Kit
    Harness Kit

Harness Kit

41 €
This cable kit allow you a fast and accurate build of your own bike harness. A 6 wire shielded cable allow a fast connection from the handle bar switches to your electronic box. The set comes with 30 cm shrink tube, 8 x 2 cm lettered shrink tube and 30 cable ties in 2 different sizes.
Quantity
In stock

 

Safe shopping

  Types of deliveries and payments:

[see details]

  Complaints and returns:

[see details]

available payment methods

Guarantee safe & secure checkout

Delivery time shipment

Harness Kit - Cable set for electronic boxes

We developed this cable set for the bike builders, who don't build new bikes frequently and who have not the time to search for the right cable lengths, diameter and colors.

This cable kit allow you a fast and accurate build of your own bike harness. A 6 wire shielded cable allow a fast connection from the handle bar switches to your electronic box. The set comes with 30 cm shrink tube, 8 x 2 cm lettered shrink tube and 30 cable ties in 2 different sizes.

Material list:

  • Control wire 6 x 0,14 qmm, shielded with 4,9 mm diameter: 2 m
  • Black, 0,14 qmm for the ground connections in the handle bar: 2 m
  • Red, 1,5 qmm for the switched 12 Volt power connection: 2 m
  • Black 1,5 qmm for a good ground connection at the bike: 3 m
DP9841
9 Items

Data sheet

Manufacturer
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Producent
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Included
30 cm shrink tube + 30 cable ties
Control wire
2 m
2 m
6 x 0
6 x 0
14 qmm shielded
14 qmm shielded

16 other products in the same category:

Lunchbox Adaptor
Quick view

Lunchbox Adaptor

96 €
Availability: 10 In Stock
The reserve led for models up to 1985 is flashing when the fuel level is below 7 liter and it is continous on when the fuel level is below 4 liter. The housing is from a 3D printer and it's waterproof with epoxy glue potted.
Touch 2 Switch
Quick view

Touch 2 Switch

44 €
Availability: 10 In Stock
You can use the module also as a standard headlight relay. Just wire the 2 thin input cables together to one push button. The first press on the push button will switch on output 1 (low beam). Every further press on the button toggle the 2 outputs.
Wiązka cyfrowa C-BS
Quick view

Wiązka cyfrowa C-BS

299 €
Availability: 6 In Stock
Cyfrowa wiązka elektryczna wersja C-BS do sterowania motocyklem za pomocą przycisków i przełączników. Zawiera dwa małe moduły sterujące komunikujące się przez magistralę szeregową.
TSM4U
Quick view

TSM4U

98 €
Availability: 3 In Stock
A short press of a turn signal button (less than 0.5 seconds) for overtaking causes the corresponding turn signal to flash 4 times. A longer press (more than 0.5 seconds) causes the corresponding turn signal to flash 40 times. This auto-cancel function can be disabled by switching on the dip switch on the pcb.
Rear Light EU-V
Quick view

Rear Light EU-V

142 €
Availability: 10 In Stock
The Rear Light EU-V is a module for vintage bikes w/o emergency flasher function. It converts the two signals from the original flasher / brake light combination in four separate outputs for brake light / rear light and indicators. A brakelight dim function can be activated.
Rear Light US
Quick view

Rear Light US

108 €
Availability: 5 In Stock
Almost every bike what runs in US have a brake light / indicator combination in the way, that 2 lamps works as brake light and as indicator as well. This makes a conversion of an imported bike from Europe according to the requirements in the US a bit tricky. A conversion of an EU bike according to the requirements in the US is much easier and less cost intensive with the Rear Light US.
Overvoltage Indicator
Quick view

Overvoltage Indicator

43 €
Availability: 10 In Stock
As soon as an on-board voltage of 15.1 volts is exceeded for longer than 2 seconds, a warning flasher function is activated via the two blinker outputs and the additional LED output is switched on. In most cases, it is then sufficient to switch off the engine immediately to prevent major damage.
Rear Light EU
Quick view

Rear Light EU

108 €
Availability: 10 In Stock
The Rear Light EU is a module for bikes with emergency flasher function. It converts the two signals from the original flasher / brake light combination in four separate outputs for brake light / rear light and indicators. A conversion of an US bike according to the requirements in the EU is much easier and less cost intensive with this new module.
Micro Speedo Polished
Quick view

Micro Speedo Polished

125 €
Availability: 10 In Stock
The speedometer is very easy to use: If the button is pressed and held down when the power supply is switched on, the wheel circumference appears on the display in cm and counts up between 50 cm and 220 cm until the button is released. The 4 LEDs on the outside indicate neutral, high beam, indicators and oil pressure.