Rear Light EU-V
    Rear Light EU-V

Rear Light EU-V

142 €
The Rear Light EU-V is a module for vintage bikes w/o emergency flasher function. It converts the two signals from the original flasher / brake light combination in four separate outputs for brake light / rear light and indicators. A brakelight dim function can be activated.
Quantity
In stock

 

Safe shopping

  Types of deliveries and payments:

[see details]

  Complaints and returns:

[see details]

available payment methods

Guarantee safe & secure checkout

Delivery time shipment

Rear Light EU-V

Almost every bike what runs in US have a brake light / indicator combination in the way, that 2 lamps works as brake light and as indicator as well. This makes a conversion of an imported bike according to the requirements in the EU a bit tricky and cost intensive.

The Rear Light EU-V is a module for vintage bikes w/o emergency flasher function. It converts the two signals from the original flasher / brake light combination in four separate outputs for brake light / rear light and indicators. A brakelight dim function can be activated.

Maximum ambience temperature: 80 degree Celsius

DP9820
10 Items

Data sheet

Manufacturer
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Dimensions
5 mm
5 mm
40 mm x 25 mm x 12
40 mm x 25 mm x 12
Input voltage range
7 - 18 Volt
Maximum temperature
80°C
80°C
Producent
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28

16 other products in the same category:

Wiązka cyfrowa C-BS
Quick view

Wiązka cyfrowa C-BS

299 €
Availability: 6 In Stock
Cyfrowa wiązka elektryczna wersja C-BS do sterowania motocyklem za pomocą przycisków i przełączników. Zawiera dwa małe moduły sterujące komunikujące się przez magistralę szeregową.
Multi Flash C
Quick view

Multi Flash C

43 €
Availability: 1 In Stock
Just connect the red cable to plus 12 Volt ignition, the black cable to ground / chassis, the thin input cables to the two outputs of the flasher relay in your bike and the thick output cables to your indicators. That's it.
Touch 2 Switch
Quick view

Touch 2 Switch

44 €
Availability: 10 In Stock
You can use the module also as a standard headlight relay. Just wire the 2 thin input cables together to one push button. The first press on the push button will switch on output 1 (low beam). Every further press on the button toggle the 2 outputs.
Przycisk 8 mm
Quick view

Przycisk 8 mm

7 €
Availability: 236 In Stock
Przycisk chwilowy ze stali nierdzewnej z gwintem 8 mm. Bardzo mały, pasuje bezpośrednio do większości kierownic. Obsługa w rękawicach.
Easy Keyless RFID
Quick view

Easy Keyless RFID

201 €
Availability: 10 In Stock
The activation of the module is made via a press on a button. Now you have 15 seconds time to put your rfid tag in front of the antenna. A red led on the antenna indicate the waiting state of the module. If the rfid tag is recognized then the led changes to blue color and the power for the bike is switching on. If the rfid tag is not recognized then the module fall back in sleep mode.
C-BS Harness
Quick view

C-BS Harness

299 €
Availability: 6 In Stock
The digital harness C-BS ("BS" stands for switches and buttons) for the bike control via push buttons and switches is an universal harness, what contain 2 small control boxes. The control boxes "talk" together via a thin serial bus cable. The switches, push buttons and power cables are wired direct to the nearest box. This reduces the amount of cables and the installation time significant in a typ