Gear Indicator Adapter
    Gear Indicator Adapter

Gear Indicator Adapter

41 €
Dimensions: 41 mm length x 26 mm wide x 12,5 mm height
Quantity
In stock

 

Safe shopping

  Types of deliveries and payments:

[see details]

  Complaints and returns:

[see details]

available payment methods

Guarantee safe & secure checkout

Delivery time shipment

Gear Indicator Adapter for BMW K-Models

The Speedoadapter for BMW K models allow an easy implementation of the 3 gearbox switches to a modern standard speedometer with inputs for the neutral and gear number indication. The green cable allow to invert the output signals and allow a connection to a wide range of speedometers. You can also connect 6 led's for the gear indication to the outputs if your speedo have no gear indicator implemented.

Input voltage range: 7 - 18 Volt

DP9852
15 Items

Data sheet

Manufacturer
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Dimensions
5 mm
5 mm
41 mm x 26 mm x 12
41 mm x 26 mm x 12
Body material
ABS plastic
waterresist potted
Input voltage range
7 - 18 Volt
Producent
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Compatible with
BMW K-models

16 other products in the same category:

Evo Flasher 2
Quick view

Evo Flasher 2

69 €
Availability: 5 In Stock
An auto-cancel function is integrated into the module. The corresponding output flashes 4 times when a turn signal button is pressed briefly for less than 0.5 seconds and then switches off. This function can be used for overtaking. If the button is pressed for longer than 0.5 seconds, the output flashes 40 times. The auto-cancel function can be deactivated by connecting the green wire to ground.
Rear Light EU-V
Quick view

Rear Light EU-V

142 €
Availability: 10 In Stock
The Rear Light EU-V is a module for vintage bikes w/o emergency flasher function. It converts the two signals from the original flasher / brake light combination in four separate outputs for brake light / rear light and indicators. A brakelight dim function can be activated.
Overvoltage Indicator
Quick view

Overvoltage Indicator

43 €
Availability: 10 In Stock
As soon as an on-board voltage of 15.1 volts is exceeded for longer than 2 seconds, a warning flasher function is activated via the two blinker outputs and the additional LED output is switched on. In most cases, it is then sufficient to switch off the engine immediately to prevent major damage.