EHC 03

386 €
The following functions are implemented:
Quantity
Last items in stock

 

Safe shopping

  Types of deliveries and payments:

[see details]

  Complaints and returns:

[see details]

available payment methods

Guarantee safe & secure checkout

Delivery time shipment

EHC for Big Dog 2003

This EHC replacement controlls the functions of your Big Dog bike. Our EHC are made as "Plug & Play" control boxes for a fast change (about 10 minutes) against the old device. There is no need to spend some hours for cablework, stripping etc...

The following functions are implemented:

  • Flasher control
  • Auto flasher off function, emergency flasher
  • Control of low - and high beam.
  • Control of ignition, starter and compression reliefs.
  • Control of the horn
  • Brake light control include dim function of the rear light

The most outputs of the EHC are short circuit protected and self resetting when a short circuit is not present anymore.

DP9847
3 Items

Data sheet

Manufacturer
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Producent
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Type
Plug & Play replacement
Compatible model
Big Dog 2003
Big Dog 2003
Installation time
~10 minutes

16 other products in the same category:

Mini Headlight Relay

44 €
Availability: 10 In Stock
You can use the module with a permanent switch if you wire the yellow cable to ground. The module works with a push button if the yellow cable is not connected. By the way, you can switch off the headlight in the button mode when you press the button for more than 2 seconds. A further press on the button switch on the headlight again.

Brake 2 Flash

37 €
Availability: 4 In Stock
Mały moduł migający dla światła hamowania. Zwiększa bezpieczeństwo przez alarmowanie kierowców z tyłu. 14 trybów migania do wyboru.

Rear Light EU-V

142 €
Availability: 10 In Stock
The Rear Light EU-V is a module for vintage bikes w/o emergency flasher function. It converts the two signals from the original flasher / brake light combination in four separate outputs for brake light / rear light and indicators. A brakelight dim function can be activated.