Big Dog Handlebar Switchboards
    Big Dog Handlebar Switchboards

Big Dog Handlebar Switchboards

102 €
Please note that these inserts are only available for the European market.
Quantity
In stock

 

Safe shopping

  Types of deliveries and payments:

[see details]

  Complaints and returns:

[see details]

available payment methods

Guarantee safe & secure checkout

Delivery time shipment

Big Dog Handlebar Switchboards

The lifetime of original handle bar button boards is a bit limited. That's why we made a copy of these boards with a few improvements for the European market. The contact surface is chemical gold plated what make it almost corrosion free. The metal dome plates produce an easy to identify "click" when pressed. You can choose between 2 brake switch sensors, the original Carling sensor or the German made Meder sensor.

Please note that these inserts are only available for the European market.

DP9848
9 Items

Data sheet

Manufacturer
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Producent
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Contact surface
Chemical gold plated
Chemical gold plated
Available for
European market only

16 other products in the same category:

Evo Flasher 1
Quick view

Evo Flasher 1

69 €
Availability: 10 In Stock
An auto-cancel function is integrated into the module. The corresponding output flashes 4 times when a turn signal button is pressed briefly for less than 0.5 seconds and then switches off. This function can be used for overtaking. If the button is pressed for longer than 0.5 seconds, the output flashes 40 times. The auto-cancel function can be deactivated by connecting the green wire to ground.
Brake 2 Flash
Quick view

Brake 2 Flash

37 €
Availability: 4 In Stock
The programming of a flasher mode is easy and will cost you about 30 seconds without the need to be a software specialist.
Micro Speedo Module
Quick view

Micro Speedo Module

52 €
Availability: 10 In Stock
The speedometer is very easy to use: If the button is pressed and held down when the power supply is switched on, the wheel circumference appears on the display in cm and counts up between 50 cm and 220 cm until the button is released. The 4 LEDs on the outside indicate neutral, high beam, indicators and oil pressure.