Lowlight Killer
    Lowlight Killer

Lowlight Killer

39 €
Dimensions: 38 mm x 16 mm x 11 mm
Quantity
In stock

 

Safe shopping

  Types of deliveries and payments:

[see details]

  Complaints and returns:

[see details]

available payment methods

Guarantee safe & secure checkout

Delivery time shipment

Lowlight Killer

In some countries is the use of a marker light / direction indicator not allowed. This module switch off the marker light function from the BCM module to the indicator if you wire the module between the BCM module and your indicator. The violet cable can be used for the led fail input of the BCM module (i.e. Dodge). It simulate a correct working indicator and result to the correct flasher frequency in the cockpit.

DP9864
10 Items

Data sheet

Manufacturer
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Dimensions
38 mm x 16 mm x 11 mm
38 mm x 16 mm x 11 mm
Body material
ABS with 2k epoxy resin potted
Input voltage range
6 - 20 Volt
Maximum temperature
80°C
80°C
Producent
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Maximum current
5 Ampere

16 other products in the same category:

Multi Flash C
Quick view

Multi Flash C

43 €
Availability: 1 In Stock
Just connect the red cable to plus 12 Volt ignition, the black cable to ground / chassis, the thin input cables to the two outputs of the flasher relay in your bike and the thick output cables to your indicators. That's it.
Flasher Checker
Quick view

Flasher Checker

72 €
Availability: 10 In Stock
If an indicator fails in subsequent operation, i.e. the current consumed falls below 20% of the normal operating current, the Flasher Checker activates the hazard warning function for as long as the flasher relay is activated. The hazard warning function switches off automatically when the flasher relay is deactivated.
Fusebox
Quick view

Fusebox

125 €
Availability: 10 In Stock
This fuse box contains 6 separate outputs which switch off in the event of a short circuit and switch on again after the short circuit has been eliminated. 4 of the outputs have continuous positive and 2 outputs can be switched on or off via 2 buttons. This can be used to switch additional headlights, cell phone chargers, etc. In addition, the supply voltage is monitored and the outputs in the mod
Holder
Quick view

Holder

8 €
Availability: 18 In Stock
The small dimensions and the low weight of the electronic box devices allow in the most cases to fix the box with Velcro tape somewhere in the bike. However, for some rough situations we recommend to fix the box with this holder at the bike. The holder have 4 mm holes and a double sided sticky tape on the upper contact surface faced to the box, what prevent the box from unwanted moves if heavy vib
Wiązka cyfrowa C-BS
Quick view

Wiązka cyfrowa C-BS

299 €
Availability: 6 In Stock
Cyfrowa wiązka elektryczna wersja C-BS do sterowania motocyklem za pomocą przycisków i przełączników. Zawiera dwa małe moduły sterujące komunikujące się przez magistralę szeregową.