Pol Changer (Indian)

43 €
Dimensions: 38 mm x 16 mm x 11 mm
Quantity
In stock

 

Safe shopping

  Types of deliveries and payments:

[see details]

  Complaints and returns:

[see details]

available payment methods

Guarantee safe & secure checkout

Delivery time shipment

Pol Changer (Indian)

Indian bikes switch the outputs for the direction indicators to minus, when active. This make a change of the original indicators against aftermarket indicators a bit tricky. This polarity changer is the solution for it. It convert the ground switched signal from the bcm module or flasher relay to a positive supply voltage for the indicators. The module contains 2 separate channels. The maximum load is 60 Watt per side.

Maximum output power: 60 Watt / output

DP9859
20 Items

Data sheet

Manufacturer
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Dimensions
38 mm x 16 mm x 11 mm
38 mm x 16 mm x 11 mm
Body material
ABS with 2k epoxy resin potted
Input voltage range
6 - 18 Volt
Producent
27404 Rhade
Axel Joost Elektronik
Dipl.-Ing. Axel Joost
Germany
Selsinger Str. 28
Maximum output power
60 Watt / output
Compatible with
Indian bikes

16 other products in the same category:

Mini Safety Box

43 €
Availability: 10 In Stock
The safety module check the 2 inputs for the neutral and sidestand switch and enables the start output when the neutral switch is closed, i.e. no gear is selected. The sidestand switch is also be checked. The ignition is switched off as long as a gear is engaged and the sidestand switch is open.

Fuel Indicator

41 €
Availability: 16 In Stock
The adjustment of the reserve level is easy: Just connect the module, fill the first required amount of gasoline in the tank and hold the green cable for a moment to ground / Minus. Now the module have store the first value. Then fill the next gasoline level in the tank and repeat the procedure and the module have stored the second fuel level.

Rear Light EU (Indian)

108 €
Availability: 10 In Stock
The Rear Light EU is a module for Indian bikes with emergency flasher function. It converts the two signals from the original flasher / brake light combination in four separate outputs for brake light / rear light and indicators. A brakelight dim function is activated by default.

Micro Speedo Module

52 €
Availability: 10 In Stock
The speedometer is very easy to use: If the button is pressed and held down when the power supply is switched on, the wheel circumference appears on the display in cm and counts up between 50 cm and 220 cm until the button is released. The 4 LEDs on the outside indicate neutral, high beam, indicators and oil pressure.

Evo Flasher 2

69 €
Availability: 5 In Stock
An auto-cancel function is integrated into the module. The corresponding output flashes 4 times when a turn signal button is pressed briefly for less than 0.5 seconds and then switches off. This function can be used for overtaking. If the button is pressed for longer than 0.5 seconds, the output flashes 40 times. The auto-cancel function can be deactivated by connecting the green wire to ground.