Motogadget mo.flash (Digital Flasher Relay) (4000010)

48 €

Quantity
Add to wishlist
On backorder (longer shipping time)

 

Safe shopping

  Types of deliveries and payments:

[see details]

  Complaints and returns:

[see details]

available payment methods

Guarantee safe & secure checkout

Delivery time shipment
Details
The mo.flash is by far the most compact load independent flasher relay on the market. Nothing comes close in size and simplicity. The mo.flash flasher unit substitutes all conventional flasher relays.

Attention: If you are looking for a flasher relay with automatic deactivation please refer to our mo.stop series.
Advantages

Ultra compact and light - in essence just a piece of cable attached to a tiny, candy-sized device
Ideal for custom bikes and mods with little mounting space - bulky conventional relays or load resistors are a thing of the past
The wiring can be placed into the handle bar or frame tubes or into the wiring harness
Almost load independent (min. 1 Watt)
Completely implemented using digital semiconductor technology. microprocessor controlled No mechanical workings, no spools, no electric contacts
Consistantly constant and correct flasher frequency and suited for almost all LED turn signal lights, all micro and halogen turn signal lights as well as all 10-watts and 21-watts turn signal lights
e. g. works with 4 turn signal lights or 2 handle bar end turn signal lights
Immediate loss free and brighter illumination of all turn signal lights
Utterly hassle-free connection using only two cables - just connect in series
Completely water tight and vibration resistant because of the moulded-in construction
Short circuit proof, automatic overload protection, switches power up to 100 W.
No heat generation while operating
Only 5 - 18 V operating voltage required
Also applicable for 6 V turn signal lights
Quality 'made in Germany' - by motogadget

Notes
The mo.flash substitutes a conventional flasher relay. This flasher relay usually is implemented BEFORE the indicator switch. The most convenient way to mount the mo.flash is to simply search and replace the original relay.

The mo.flash can NOT replace the push-button controls. Please refer to our mo.relay+ if you are looking for a flasher relay for push-buttons.

Newer Harley-Davidson model series use a special module to control the flasher controls (TSM/TSSM). These modules can NOT be replaced or complemented by the mo.flash.Specification: Casing (L x W x H) 18 mm x 13 mm x 9.5 mm
Connector cable length approx. 2 x 50 mm
Weight approx. 4 g
DP9555

Data sheet

Motogadget
Electrics

Specific References

EAN13
5908220456797
MPN
DP9555

16 other products in the same category: