A set of pegs for one axle on your motorcycle.
Pegs are prepared to be mounted on a threaded rod M10 x 1.25 (standard size).
The length of the rod should be selected individually and it is not included with the pegs. After screwing the pegs onto the rod, tighten the locking bolts on the side of the peg.
Note! If the axles on your motorcycle do not have through holes or the holes are smaller than 10 mm - you will not mount these pegs.
Set contains:
- 2x aluminum peg with plastic end
Overall length: 80mm
Possibility of mounting on the front or rear axle, thanks to which you will avoid damage to the suspension in the event of an accident.
We also offer pegs mounted on an M8 threaded rod (for smaller holes in the axis).